Standard
Floor Weaving Looms Schacht
Standard floor loom comes in two styles: The Standard Low Castle
and The Standard High Castle. Though both looms take up identical floor
space, the lower profile of the Low Castle model appears visually
smaller. A High Castle loom includes a storage tray and holes
drilled in the top of the castle uprights for the swivel pin of an
extension lamp, otherwise the looms function the same. Both the
Standard Low Castle and the Standard High Castle Schacht looms are
available in 36" and 46" wide weaving widths. Shown
above: Maple Standard High castle Loom with double back beam.
All Standard Schacht floor
looms may be
ordered with eight or Four Now-Four Later shaft
options. The number of shafts you choose will depend on the kind of
weaving you intend to do. Though most weave structures can be woven on
four shafts, additional shafts will increase your pattern option
extensively.
The Schacht Standard weaving loom has an
underslung jack mechanism to raise the shafts. The jacks pivot from two
points equidistant from the center and lift the shafts by pushing up on
the center point. Schacht employs a parallel lamm system which
gives our looms a light treadling action. Because of this parallel
lamm, it isn't necessary to adjust the tie-up cords. Shown
above: Cherry Standard High Castle 8 Harness Loom
The
Schacht tie-up system is quick and easy to use. Premeasured nylon tie-up
cords hang from the lamms and are attached to a treadle by sliding the
appropriate cords into the treadle slot. This makes changing
tie-ups very fast.
Other special features of the Schacht
Standard floor looms include: friction reducing aluminum shaft channels,
a back beam which folds with or without a warp on the loom, removable
back and breast beams, and an adjustable open-sided beater. The
Schacht braking system employs a ratchet and dog on the cloth beam and a
friction brake on the warp beam. This combination give you precise
tension control at all times. All Schacht Standard looms come complete
with your choice of reed (please choose below), flat steel heddles, ,
one 11" boat shuttle with bobbin, reed hook and lease sticks.
Inserted eye heddles or Texsolv nylon string heddles may be substituted
for a small additional charge. Shown above:
Schacht Standard Low Castle Loom with lamp accessory. Manufactured with
pride by Schacht Spindle Company.
Reed for Standard Loom
Please choose one when
purchasing above loom. This is part of the loom above and FREE when
purchasing a Schacht loom. Extra reeds can be purchased further down the
page.
Quantity
6
Dent 8 Dent
10 Dent 12
Dent 15 Dent
A word about delivery
FREE shipping on all Schacht floor weaving
looms!
With the exception of the Wolf Pup, all Schacht Wolf looms will be
shipped by freight to your home. You will be notified in advance of the
delivery day of your weaving loom. You will have to arrange for someone
to transport the loom off the truck and into your home. (The delivery
driver will do this only at an extra charge. If necessary you can
arrange this with us). Please note that there is a shipping surcharge
for weaving looms shipped to Alaska and Hawaii.
Schacht Sectional Beam for
Standard Floor Loom
Sectional warp beams are available for
the Schacht looms. The Schacht sectional beams are easily
assembled and can be installed on the existing warp beam of your Schacht
loom at any time. Sectional beams for Standard Schacht looms
have 2" sections and a one half yard circumference. They are
available in maple or cherry with maple pegs. Please
note your loom serial number when ordering.
Double Back Beams
facilitate the different warp
tensions for weave structures such as warp pile, supplementary warp, and
Bedford cord. Installation is straight-forward; holes have been
predrilled in the loom for easy assembly. Please supply us with the
serial number of your loom when ordering.
Schacht Standard Loom
Specifications
Weaving
Width
36"
46"
Overall
Width
44"
53"
Height-Breast
Beam
32"
32"
Height-Low
Castle
37"
37"
Height-High
Castle
46"
46"
Depth-Open
38"
38"
Depth-Folded
26"
26"
Weight-8-Shaft
125
lb
141
lb
Weight-4
Now-4 Later
110
lb
125
lb
Weight-High
Castle
add
10 lb
Weight-Shipping
add
27 lb
Weight-4
Later Kit
15
lb
16
lb
Heddles-8
Shaft
1000
1000
Heddles
4 Now-4 Later
1000
1000
STANDARD
FLOOR LOOM ACCESSORIES
36"
Double Back Beam
19
lb
46"
Double Back Beam
22
lb
36"
Sectional Beam
9" x 3" x 2"
7
lb
46"
Sectional Beam
8"
x 3" x 2"
9
lb
Raddle
for up to 26"
29
1/2" x 3" x 1"
1
1/2 lb
Raddle
for up to 40"
44
1/2" x 3" x 1 1/2"
2
1/2 lb
Raddle
for up to 48"
52
1/2" x 3" x 1 1/2"
3
lb
Lamp
Holder
4
1/2" x 2 1/2" x 1 1/4"
8
oz
REEDS
AND HEDDLES
36"
& 46" Reeds
Total
Length: 1" longer than weaving width
Total Height: 5"
Flat
Steel Heddle
9"
from center of eye to center of eye-9/16" eye
Inserted
Eye Heddle
9"
from center of eye to center of eye-1/4" eye
Texsolv
String Heddle
9
3/8" end to end-1/2" eye
Schacht Loom
Bench
The Schacht loom bench is a beautiful companion piece to our Wolf looms
and Standard floor looms. The bench seat height is adjustable from
19" to 24" and has been designed to offer you both a flat and
a slanted seat position. Optional bag for bench hold shuttles and yarn.
Quantity
Loom
Bench Maple - $318.00
Bag
for Bench Maple - $42.75
Loom
Bench Cherry - $390.00
Bag
for Bench Cherry - $42.75
Schacht weaving looms are sturdy looms for many
years of
weaving pleasure! Schacht floor looms are
constructed out of solid maple or cherry and manufactured by Schacht
Spindle Company.