spinners choice banner

Portable Weaving Looms

Schacht School Loom 

schacht school loom - great for beginning tapestry weavers
What's most important in a loom for young weavers is that it ensures success. Schacht designed this simple frame loom to do just that.  It has a 15" weaving width, a built-in stand for upright use on the floor or a table top, plus durable, 6 per inch, plastic warp spacers for uniform warping.  Students of all ages will find it easy to use.  Included with each loom are two pick-up sticks, a weaving needle, and simple warping and weaving instructions.  The Schacht School Loom is made of hard maple and unfinished.

$86.95  Quantity 


Schacht Tapestry Loom

 Tapestry weavinschacht tapestry loom with standg is considered by many to be the most personal of all weaving.  Among the simplest of looms, the Schacht tapestry loom holds a continuous warp under tension, allowing the weaver to see all of the warp at once. Sheds are formed using heddle bars and string heddles. While only two heddle bars are needed for traditional tapestry weaving, Schacht provides four heddle bars so that beginning weavers can also experiment with 4-shaft pattern weaving. 

To keep the warp tension even throughout your weaving, teh Schacht Tapestry loom has a tension beam with thumbscrews on the end which allow for easy adjustment.   Available in 18" and 25" weaving widths. The Schacht continuous warping system allows a 60" long warp to be put directly on the loom without using any other warping tools. Shown with optional stand.

18 inch weaving width  $125.95     25 inch weaving width  $137.95


Stand for Schacht Tapestry Loom

A-Frame Stand for Schacht Tapestry Loom. Designed for use with the Schacht portable tapestry looms, the A-Frame Stand inexpensively answers the question of how to hold the loom upright on the table top or the floor while weaving.  The adjustable side arms let you vary the angle, and may be folded up for storage. Solid maple construction Fits both sizes of Schacht Tapestry loom.

$60.95   Quantity  


Schacht Flip Rigid Heddle Loom

schacht flip loom - folding rigid heddle loomFlip, the new Schacht folding rigid heddle loom, is comfortable, compact, sturdy, and a pleasure to weave on. Designed for high performance, this loom folds in a jiffy for storage or transport. Warp in a flash. Included with Flip rigid heddle loom are clamps and a warping peg for direct-loom warping, as well as instructions for both direct and pre-measuring methods. The top cross brace allows long warps, up to 5-6 yards (depending on Schacht Flip and Rigid Heedle Loomweight and winding paper), to be wound on the beams without impacting the size of the shed. The heddle, available in 8, 10 and 12 dents per inch, your choice! Choose from 15, 20 or 25 inch weaving width. The Schacht Flip rigid heddle loom is shown with optional stand above and folded to the right. Please Note: If your Flip loom was purchased before 2-17-2010 and you would like to add a stand you will also need to purchase the retrofit kit below.

15 inch weaving width  $282.95    20 inch weaving width  $299.95
25 inch weaving width  $325.95    Stand for Schacht Flip Loom all sizes $203.95


Please choose a Reed for Schacht Flip Rigid Heddle Loom when ordering

8 dent reed  10 dent reed  12 dent reed  

Schacht Table Looms

Table looms are greschacht table loom - take your weaving with youat for classroom use, workshops, sampling, and small projects.  They are ideal for learning about four- and eight-shaft pattern weaving, since the direct tie-up through the hand levers allows for infinite experimentation. The Schacht 4 harness table loom is expertly crafted of the finest hard maple and built for maximum structural stability. Schacht uses fine-toothed nylon gears on both the warp and cloth beams, which allow precise tension control. The front-mounted levers make shaft selection easy to reach with each hand.  Front-mounted levers also make it easy to see at a glance which shafts are raised. Schacht table looms are available in three weaving widths-15", 20", and 25"- with four or eight shafts.  The Schacht table loom comes with a carbon steel reed in your choice of 6, 8, 10, 12, or 15 dents. (Please choose one below)  Flat steel heddles, two apron rods, and three lease sticks are also included.  A double back beam is available for all table loom widths as an additional accessories.

15" 4 Harness  $720.95   15" 8 Harness   $930.95 

20" 4 Harness  $836.95   20" 8 Harness- $1067.00 

25" 4 Harness  $954.95    25" 8 Harness- $1204.95



Reed for Schacht Table Loom  

Please choose one when ordering a Schacht Table Loom. Additional reeds can be purchased separately.

6 Dent 15" 8 Dent 15" 10 Dent 15" 12 Dent 15" 15 Dent 15"

6 Dent 20" 8 Dent 20" 10 Dent 20" 12 Dent 20" 15 Dent 20"

6 Dent 25" 8 Dent 25" 10 Dent 25" 12 Dent 25" 15 Dent 25"


Stand for Schacht Table LoomSchacht table loom

The X-frame floor stand makes the Schacht table loom the correct height to be used with a standard chair. Table loom stand folds easily when not in use. Installation instructions included. Schacht 8 Harness loom and stand shown to right.

For 15" Loom   $233.95 

For 20" Loom   $238.95 

For 25" Loom   $249.95